Features:
1. Bench lathes are high cost-performance small lathes, have wide machining range, suitable in teaching and home-using fields.
2. Bench lathes bed adopt high-quality casting steel and through advanced structural optimization, to ensure high rigidity and good stable.
3. Through two operating handle can adjust spindle speed, realize 9-steps different speed, to meet your machining requirements.
4. Four handles on the feed box can freely combine, to gain multi-cutting speed and threads.
5. Spindle of bench lathes is supported with precision roller bearings, run-out of spindle is to be 0.01mm.
6. Bench lathes adopt Φ38mm spindle bore, meet long-fine bar processing; standard 3-jaw chuck can quickly clamp workpieces.
7. Bench lathes with removable gap can cut big-diameter short bar.
8. Foot-switch can quickly break power and stop spindle, ensure safety of operator and reduce auxiliary processing time.
9. Bench lathes is easy to operate, Beginners can operate by themselves simply by studying.
Views of bench lathes
» Spindle box has two forms, right angle appearance is standard; curved spindle box can be chose.
» According to the usage habits of different customers, Bench lathes can use left wheel and right wheel structure.
» Bench lathes including 3-jaw chuck, steady rest, follow rest, threading-cutting dial, precise screw & rack, tailstock, etc.
Technical parameter:
Model |
Units |
T-1230A T-1236A T-1240A |
T-1330AL T-1336AL T-1340AL |
Max. swing over bed |
mm |
300 |
320 |
Max. swing over cross slide |
mm |
180 |
198 |
Max. swing over gap |
mm |
430 |
476 |
Distance between centers |
mm |
750/910/1000 |
|
Spindle bore |
mm |
38 |
|
Taper of spindle bore |
- |
MT 5 |
|
Range of spindle speed |
rpm |
65-1400 or 65-1810 (9steps) |
|
Range of longitudinal feeds |
mm/rev |
0.079-1.291 |
|
Range of cross feeds |
mm/rev |
0.017-0.276 |
|
Range of metric threads |
mm |
0.4-7 |
|
Range of inch threads |
TPI |
4-60 |
|
Max. travel of tailstock quill |
mm |
100 |
|
Taper of tail stock quill |
- |
MT3 |
|
Power of motor |
kw |
1.1/1.5 |
|
Gross Weight |
kg |
550/590/670 |
|
Net Weight |
kg |
500/540/620 |
|
Packing Size |
mm |
1480/1680/1940 x750x1400 |
Accessories:
Standard: √ Three jaw chuck √ Centers √ Thread chasing dial √ Chip tray √ Splash guard √ Steady rest √ Follow rest √ Toolbox & tools
|
Optional: ★ Coolant system ★ Brake ★ Living center ★ Taper turning attachment ★ Drill chuck ★ Stopper ★ QCTP ★ DRO ★ Chuck cover ★ Leadscrew cover ★ Tool post cover ★ Four jaw chuck |
http://www.timewaymachinery.com/